SITEC OXYGEN / HELIUM GAS BOOSTERS.

All SITEC booster are made with high quality materials consisting of +-80% Stainless Steel, +-20% Aluminum that results in a very well engineered cooling system. The boosters' surface is anodized and the drive gas requirement is between 4 Bar - 8 Bar which can be used easily with any LP compressor that supply efficient flow rate for each of the specified models.

Safety is the top priority for SITEC, and the boosters are very conservative by using low inlet pressure and by following the manufacturer's recommendations for O2 handling and units' maintenance.

SITEC gas boosters are piston-types, air-driven boosters, they use the differential piston area principle to operate. It features low air consumption, quiet operation, optional mechanical separation, and compatibility with a wide range of common gases.

The boosters are reciprocating, single, double acting or two stage air operated designs, using an air-piloted unbalanced type air directional valve to cycle the boosters. They are designed to make optimum use of commercially bottled gases as low as 2 Bar. The boosters are applicable across a variety of industries including aerospace, automotive, chemical, fire fighting, agriculture, fluid power, machine tool, plastics, and packaging.
Pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for higher pressure yet lower volume of air or gas.

Industrial applications include charging accumulators, inflating high pressure tires or charging shock struts from lower pressure supply sources, the transferring of gas from a supply cylinder to another container or the actuating of air chucks in machine tools. Where production machinery or test setups require higher air pressures than normally provided by the shop air system.

The boosters can be installed as components or can be supplied as  complete, ready-to-use power packages. Use of the boosters power unit eliminates the need to develop the basic power supply circuit, the time to select and buy the needed accessories and the time required to test and troubleshoot the circuit.

If you are interested in purchasing a gas booster pump, please come to our workshop for a demonstration of a GBT15/40 in action.

Double Stage.

SITEC GBT15/40 

Designed for savenging purposes and can use a oxygen/helium cylinder down to 3.4Bar. The inlet supply pressure must be regulated to 30Bar Max.

SITEC GBT15/40 Specifications:

- Double Stage O2/He Booster
- Ratio 40:1
- Drive Gas Pressure: 4 - 8 Bar
- Min Inlet Pressure: 3.4 Bar
- Max Outlet Pressure: 332 Bar
- Max Flow Rate: 92L/min @ Pi=20Bar
- Drive Gas connection G1/2"
- In/outlet Connection DIN 5/8 BSP Female
- Size 58 x 26 x 24cm

SITEC SBT40

SITEC SBT40 is one of the latest models of SITEC wide range of boosters. The innovation behind the SBT40 combined the high performance with  high effeciency to present a unit which is ideal to be used by individual divers and dive centers alike.  The unit is robut and consists of mainly stainless steel with ALuminum cooling system.

SITEC SBT40 Specifications

- Two-stage Ratio 1:15 and 1:40

- Drive gas: 4 - 8 Bar

- Min inlet: 3.5 Bar

- Rated Outlet: 280 Bar

- Max Outlet: 320 Bar

- Inlet Connection: 9/16 UNF male; Outlet Connection:  
  G5/8 (DIN 300Bar)

- Drive gas Connection: G1/2 (LP compressor QD
  optional)

- Size: 45*20*18 cm

- Net Weight: 15 KG

- Gross Weight: 16.8 KG

Single Stage Double Acting

SITEC GBD40

SITEC GBD Series offer all what a single stage booster would offer yet with double result. The unit is solid and consists of mainly stainless steel with aluminum cooling system. It's ideal to fill small and middle sized  cylinders and  can be used as fixed unit or as a portable one.


SITEC GBD40 Specifications

- Ratio 40:1

- Drive Pressure (Pa) <8.3 Bar

- Drive Gas connection G1/2

- Min Input (Pi) 12 Bar

- Max Output (Po) 332 Bar

- Max Flow Rate 112L/min @ Pi=20 Bar

- In/outlet Connection DIN 5/8 BSP Female

Photo to come.

SITEC GBD25

SITEC GBD Series offer all what a single stage booster would offer yet with double result. The unit is solid and consists of mainly stainless steel with aluminum cooling system. It's ideal to fill small and middle sized  cylinders and  can be used as fixed unit or as a portable one.

 SITEC GBD25 Specifications

- Ratio 25:1

- Drive Pressure (Pa) <8.3 Bar

- Drive Gas connection G1/2

- Min Input (Pi) 12 Bar

- Max Output (Po) 332 Bar

- Max Flow Rate 174L/min @ Pi=20 Bar

- In/outlet Connection DIN 5/8 BSP Female

Photo to come.

Single stage single acting.

SITEC GB25

The GB25 is ideal for individual divers who have access to higher drive gas supply such as LP compressors or air banks. The booster  is an excellent choice for filling small and mid sized cylinders. Its size and weight makes it a great portable unit that can be carried easily.

SITEC GB25 Specifications: 

- Single Stage O2/He Booster
- Ratio 25:1
- Drive Gas Pressure: 4 - 8 Bar
- Min Inlet Pressure: 7.5 Bar
- Max Outlet Pressure: 200 Bar
- Max Flow Rate: 91L/min@PI=20bBar

- Connection DIN 5/8 BSP Female

- Size 41 x 27 x 24

 

SITEC Mini XB30

SITEX XB30 is ideal for individual divers who need a postable unit to travel with and use in remote areas. The unit is ideally used with small cylinders such as rebreather cylinders. Its solid construction of stainless steel makes it one of the  most robust  boosters in the market.

SITEC Mini XB30 Specifications:

- Single Stage O2/He Booster

- Ratio 30:1

- Drive Gas Pressure: 4 - 8 Bar

- Min Inlet Pressure: 7.5 Bar

- Max Outlet Pressure: 200 Bar

- Max Flow Rate: 43L/min@Pi=20Bar

- Piston Displacement Cu.In. Per Cycle 0.93

- Inlet/Outlet Connection DIN 5/8" BSP Female

- Size 31*12*13 cm

- Net Weight 7 kg

- Gross Weight 9 kg